slip on forged steel flange-manufacture,factory,supplier from China
(Total 24 Products for slip on forged steel flange)
Sliding flanges are suitable for all kinds of pipe connections, including low, medium and high pressure pipes and various media, such as liquid, gas, steam, etc.
Contact Now
Butt welded flange is generally made by forging or forging rolling process. When the steel plate or section steel is used, the following requirements must be met: 1, welding flange should be ultrasonic detection, no delamination defects; 2. It should be cut into strips along the rolling direction of the steel, bent and welded into a ring, and make the surface of the steel form a cylinder of the ring. The steel plate shall not be machined directly into a neck butt welding flange; 3, the butt weld of the ring should adopt full penetration weld; 4.
Contact Now
Socket flanges are a type of connecting pipe fitting, which are formed by inserting the end of a pipe into a flange ring ladder and welding it to the pipe end and outer side. Depending on whether there is a neck, socket flanges are divided into two types: with and without a neck.Socket flanges are mainly used for pipe connection. Due to their structural characteristics, they have good rigidity and sealing performance and can be used in applications with pressures ranging from 1.0 to 10.0 MPa.
Contact Now
Forged carbon steel flanges are an important mechanical component widely used in the field of pipeline connection. It is mainly made of carbon steel material and undergoes forging processing, resulting in high strength and toughness.The main advantages of forged carbon steel flanges include high strength, good corrosion resistance, and reliable connection. Due to its high strength and toughness, it can withstand high pressure and impact, making it suitable for harsh environments such as high pressure and high temperature.
Contact Now
The first thing to look at is the height of the protrusion (convex surface), and the second thing is to see whether there is an anti-slip ring on the protruding surface (convex surface). The former is, but the latter is not. Moreover, the two flange connection forms are also different.
Contact Now
Matters Needing Attention:Before installation, it is necessary to clean the sliding flange accordingly to ensure that its surface is free of dirt and damage, in order to avoid leakage or damage during or after installation.During the installation process, carbon steel sliding flanges need to be classified according to corresponding specifications and standards, and installed according to the instructions or specifications. If sealing gasket is required, it shall be selected with good oil resistance and anti-aging performance, and its installation shall be correct.
Contact Now
Forged Carbon Steel Flanges are an important mechanical component made primarily from carbon steel material through forging processes. This type of flange has high strength and toughness, capable of withstanding significant pressure and impact, making it suitable for harsh environments such as high pressure and high temperature.In addition, Forged Carbon Steel Flanges also have good corrosion resistance and can adapt to various corrosive media.
Contact Now
The full name of die forging is die forging. The heated blank is placed in a forging die fixed on the die forging equipment and is forged into shape. The basic processes of die forging: blanking, heating, pre-forging, final forging, skin punching, trimming, tempering, and shot blasting. Commonly used processes include upsetting, lengthening, bending, punching, and forming. Commonly used die forging equipment: die forging hammer, hot die forging press, flat forging machine and friction press, etc.
Contact Now
During free forging, the shape of the forging is gradually forged from the blank through some basic deformation processes. The basic processes of free forging include upsetting, drawing, punching, bending and cutting.Upsetting. Upsetting is an operation process of forging the original blank along the axial direction to reduce its height and increase its cross-section. This process is commonly used for forging gear blanks and other disc-shaped forgings. Upsetting is divided into two types: total upsetting and partial forging. Pull out.
Contact Now
1, industrial pipeline system: In the industrial field, flanges are widely used in all kinds of pipeline systems, such as chemical, oil, natural gas, food processing, etc. Through the flange connection, the different parts of the pipe can be closely connected, able to withstand high pressure and high temperature and other working environments, and ensure the normal transmission of fluids.2, valves and equipment connection: flanges are also used to connect valves, pumps, compressors, containers and other equipment.
Contact Now
The main production processes are mainly divided into four types: forging, casting, cutting and rolling.The cast flange has accurate rough shape and size, small processing volume, and low cost, but it has casting defects (pores, cracks, inclusions); the internal structure of the casting has poor streamlined structure (if it is a cutting part, the streamlined shape is even worse);Forged flanges have low carbon content and are generally less likely to rust than cast flanges.
Contact Now
Flanges are disk-shaped parts, the most common in pipeline engineering, flanges are used in pairs and with matching flanges on valves. In pipeline engineering, flanges are mainly used for pipeline connection. In the need to connect the pipe, a variety of mounting flanges, low pressure pipes can use wire flanges, more than 4 kg of pressure using welded flanges. Put a gasket between the two flanges and fasten them with bolts.
Contact Now
Large diameter series, stainless steel series, carbon steel series, alloy steel series, our factory's main products include: neck flange, butt welding flange, plate flat welding flange, flat flange flat welding ring loose flange, Welding ring loose flange, integral flange, forged flange, flange cover, please call us for inquiries and look forward to cooperating with you.The execution standards of butt welding flanges are: chemical standard HG20592-2010, national standard GB/T9119, petrochemical standard SH/T3046, mechanical standard JB/T81-94, etc.
Contact Now
The material of the welding end flange can be selected according to the application requirements and working environment. Common materials include carbon steel, stainless steel, and alloy steel.Carbon steel welding flanges have good corrosion resistance and toughness, and are suitable for low-pressure and low-temperature media such as air, water, and petroleum. Stainless steel welding flanges have good corrosion resistance and high temperature performance, and are suitable for media with high corrosion resistance requirements, such as acids, alkalis, and seawater.
Contact Now
Carbon steel blind flanges are a type of connector used on piping systems and are typically used to seal holes or ports in the piping system.
Contact Now
Installation precautionsThe tightening force of carbon steel flanges should be uniform and consistent, and the compression amount of the rubber pad should be controlled at around 1/3.When installing carbon steel flanges, it is necessary to ensure that the sealing surface of the flange is flat and clean. During installation, oil stains and rust spots should be carefully cleaned.About UsThe company has many years of production experience in the forging industry and has accumulated years of processing foundation for metal products with high precision requirements and special technical content.
Contact Now
Stainless steel flanges are widely used in petroleum, chemical, aerospace, light industry and other fields. Its main role is to connect pipes and equipment, so that it can effectively transfer a variety of fluid media. At the same time, the stainless steel flange also has good corrosion resistance and corrosion resistance, and has high use value.Fourth, stainless steel flange manufacturing materialsThe manufacturing materials of stainless steel flange are usually 304, 316, 316L and other stainless steel materials, as well as titanium, metal nickel and so on.
Contact Now
Stainless steel flange is a common pipe connection, it is widely used in various industrial fields, including petroleum, chemical, food processing, pharmaceutical and so on. As an important part of the pipeline system, stainless steel flanges bear the function of connecting, sealing and supporting the pipeline.The stainless steel flange consists of two interconnected ring parts that are bolted together. These two ring parts are called flanges respectively, and they usually have a hole in the middle for connecting pipes.
Contact Now
Flat welding flange connection is the two pipes, pipe fittings or equipment, first fixed on a flange, between the two flanges, plus flange pad, bolted together to complete the connection. Some pipe fittings and equipment have their own flanges, which are also flange connections. Flat welded flanges are divided into threaded connection (wire connection) flanges and welded flanges. Low pressure small diameter wire flange, high pressure and low pressure large diameter are welded flange, different pressure flange thickness and connection bolt diameter and number are different.
Contact Now
Transportation Precautions:Make sure the flange is not moved or bumped during transportation to avoid damage.If container transportation is used, the flange needs to be placed in the container and the sealing of the container must be ensured.If transported by bulk carrier, the flange needs to be placed at the designated location on the cargo ship and the stability of the cargo ship must be ensured.During transportation, you need to pay attention to weather and road conditions to avoid affecting transportation safety.About UsWelcome to Shandong Xinyi Intelligent Manufacturing Co., Ltd.
Contact Now
The sliding flange is mainly composed of flange, gasket, bolt and so on. Among them, the size parameters of the flange include outer diameter, aperture, groove depth, groove width, etc. The size parameters of the gasket include inner diameter, outer diameter, thickness, etc. In addition, the diameter, length and other parameters of the bolt are also very important, which determine the installation method and sealing effect of the entire sliding flange.
Contact Now
There are various types of sealing surfaces available for carbon steel blind flanges, including flat, raised, recessed/raised, tongue-and-groove, and ring joint faces. The choice depends on the specific circumstances.The purpose of carbon steel blind flanges is to completely isolate the production medium, preventing it from leaking out due to incomplete closure of the cut-off valve. They are commonly used at the ends of equipment connections, before and after cut-off valves, or between two flanges.When using carbon steel blind flanges, attention should be paid to their maintenance and upkeep.
Contact Now
Flat welded flange with neck belongs to the national standard flange system. It is one of the manifestations of the national standard flange (also known as GB flange), and is one of the commonly used flanges on equipment or pipelines. The neck height of flat welded flange with neck is low, which improves the stiffness and bearing capacity of the flange.
Contact Now
PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.
Contact Now
Relate News
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
العربية
Русский
日本語
Italiano
