Sa a105 B16-manufacture,factory,supplier from China
(Total 24 Products for Sa a105 B16)
SA105 B16 is a widely used low-alloy steel material in the manufacturing of valves and pipeline connection components. It has excellent mechanical properties, low-temperature resistance, and welding performance, able to meet the needs of various complex working environments.Through normalizing treatment, the tensile strength of SA105 B16 can reach the range of 485MPA to 655MPA, exhibiting good mechanical properties. It can undergo impact testing at -46°C, suitable for working in low-temperature environments.
Contact Now
The SA-105 flange is typically made of high-chromium and nickel stainless steel, which exhibits excellent corrosion resistance. The main chemical components include chromium (Cr), nickel (Ni), and molybdenum (Mo), which together enhance the material's corrosion resistance and mechanical strength.The SA-105 flange has high tensile strength and yield strength, enabling it to withstand high pressure and vibration.
Contact Now
Carbon steel flanges, also known as carbon steel flanges, are flanges or end flange connections whose body material is carbon steel. Flanges made of carbon steel are commonly referred to as carbon steel flanges. Common materials include cast carbon steel grades WCB, forgings A105, or Q235B, A3, 10#, #20 steel, 16manganese, 45# steel, Q345B, etc. Usually, to prevent rust, the flange surface is plated (yellow zinc, white zinc, etc.), or treated with anti-rust oil and anti-rust paint.
Contact Now
Product Advantages1.Leakage Prevention: Carbon steel blind flanges can block the holes in the pipeline to prevent the leakage of media, gas or liquid, and ensure the safe operation of the pipeline system.2.Cleanliness of the pipeline system: When the pipeline system needs to be cleaned or stopped, the use of carbon steel blind flanges can prevent pollutants in the pipeline from entering the pipeline system and ensure the cleanliness of the pipeline system.3.High flexibility in use: carbon steel blind flange does not require the center hole of the pipeline system and the connection of the pipel
Contact Now
Socket flanges are a type of connecting pipe fitting, which are formed by inserting the end of a pipe into a flange ring ladder and welding it to the pipe end and outer side. Depending on whether there is a neck, socket flanges are divided into two types: with and without a neck.Socket flanges are mainly used for pipe connection. Due to their structural characteristics, they have good rigidity and sealing performance and can be used in applications with pressures ranging from 1.0 to 10.0 MPa.
Contact Now
Forged carbon steel flanges are an important mechanical component widely used in the field of pipeline connection. It is mainly made of carbon steel material and undergoes forging processing, resulting in high strength and toughness.The main advantages of forged carbon steel flanges include high strength, good corrosion resistance, and reliable connection. Due to its high strength and toughness, it can withstand high pressure and impact, making it suitable for harsh environments such as high pressure and high temperature.
Contact Now
Forged Carbon Steel Flanges are an important mechanical component made primarily from carbon steel material through forging processes. This type of flange has high strength and toughness, capable of withstanding significant pressure and impact, making it suitable for harsh environments such as high pressure and high temperature.In addition, Forged Carbon Steel Flanges also have good corrosion resistance and can adapt to various corrosive media.
Contact Now
The main production processes are mainly divided into four types: forging, casting, cutting and rolling.The cast flange has accurate rough shape and size, small processing volume, and low cost, but it has casting defects (pores, cracks, inclusions); the internal structure of the casting has poor streamlined structure (if it is a cutting part, the streamlined shape is even worse);Forged flanges have low carbon content and are generally less likely to rust than cast flanges.
Contact Now
Large diameter series, stainless steel series, carbon steel series, alloy steel series, our factory's main products include: neck flange, butt welding flange, plate flat welding flange, flat flange flat welding ring loose flange, Welding ring loose flange, integral flange, forged flange, flange cover, please call us for inquiries and look forward to cooperating with you.The execution standards of butt welding flanges are: chemical standard HG20592-2010, national standard GB/T9119, petrochemical standard SH/T3046, mechanical standard JB/T81-94, etc.
Contact Now
Installation precautionsThe tightening force of carbon steel flanges should be uniform and consistent, and the compression amount of the rubber pad should be controlled at around 1/3.When installing carbon steel flanges, it is necessary to ensure that the sealing surface of the flange is flat and clean. During installation, oil stains and rust spots should be carefully cleaned.About UsThe company has many years of production experience in the forging industry and has accumulated years of processing foundation for metal products with high precision requirements and special technical content.
Contact Now
Stainless steel socket flange is a commonly used pipe connection method, which has the following characteristics: 1. Wide applicability: Stainless steel socket flanges are suitable for pipe connections of different materials, diameters and pressure levels.
Contact Now
Stainless steel flanges also have high strength and durability. Stainless steel material has good mechanical properties, so that the flange can withstand greater pressure and tension, to ensure the stability and safety of the pipeline system. Stainless steel flanges can also be used for a long time without easy damage, reducing the frequency of maintenance and replacement, and reducing the cost of use.When selecting stainless steel flanges, it is necessary to take into account the working conditions and requirements of the piping system.
Contact Now
Product Features1.High corrosion resistance: 10 Stainless Steel Blind Flange has excellent corrosion resistance, allowing for long-term stable use in harsh environments without being easily affected by corrosion and oxidation.2.High strength and durability: 10 Stainless Steel Blind Flange has high strength and durability, capable of withstanding high pressure and temperature requirements, resulting in a long service life.3.Good hygiene performance: 10 Stainless Steel Blind Flange is easy to clean and does not harbor bacteria and dirt, making it particularly suitable for applications in the foo
Contact Now
Matters Needing Attention:Before installation, it is necessary to clean the sliding flange accordingly to ensure that its surface is free of dirt and damage, in order to avoid leakage or damage during or after installation.During the installation process, carbon steel sliding flanges need to be classified according to corresponding specifications and standards, and installed according to the instructions or specifications. If sealing gasket is required, it shall be selected with good oil resistance and anti-aging performance, and its installation shall be correct.
Contact Now
Carbon steel sliding flanges usually have the following characteristics:1.Material: Carbon steel sliding flanges are usually made of high-quality carbon structural steel materials.
Contact Now
Stainless steel flanges are widely used in petroleum, chemical, aerospace, light industry and other fields. Its main role is to connect pipes and equipment, so that it can effectively transfer a variety of fluid media. At the same time, the stainless steel flange also has good corrosion resistance and corrosion resistance, and has high use value.Fourth, stainless steel flange manufacturing materialsThe manufacturing materials of stainless steel flange are usually 304, 316, 316L and other stainless steel materials, as well as titanium, metal nickel and so on.
Contact Now
Flanges are disk-shaped parts, the most common in pipeline engineering, flanges are used in pairs and with matching flanges on valves. In pipeline engineering, flanges are mainly used for pipeline connection. In the need to connect the pipe, a variety of mounting flanges, low pressure pipes can use wire flanges, more than 4 kg of pressure using welded flanges. Put a gasket between the two flanges and fasten them with bolts.
Contact Now
Sliding flanges are suitable for all kinds of pipe connections, including low, medium and high pressure pipes and various media, such as liquid, gas, steam, etc.
Contact Now
The full name of die forging is die forging. The heated blank is placed in a forging die fixed on the die forging equipment and is forged into shape. The basic processes of die forging: blanking, heating, pre-forging, final forging, skin punching, trimming, tempering, and shot blasting. Commonly used processes include upsetting, lengthening, bending, punching, and forming. Commonly used die forging equipment: die forging hammer, hot die forging press, flat forging machine and friction press, etc.
Contact Now
blind flange (blind flange), also known as blind flange, real name blind plate. It is a connection form of flange. It's basically a flange without a hole in the middle. One of its functions is to block the end of the pipeline, and the other is to facilitate the removal of debris in the pipeline during maintenance. In terms of sealing effect, it has the same effect as the head and the tube cap. However, there is no way to disassemble the head, and the flange blind plate is fixed with bolts, which is very convenient to disassemble.
Contact Now
PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.
Contact Now
In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.
Contact Now
Product Application ScenarioIndustrial pipeline connection: 8 Stainless Steel Blind Flange is used in industrial fields to connect pipe segments of piping systems, such as petroleum, food processing, pharmaceutical and water treatment industries. This is often used to close or plug pipes to allow repairs, cleaning or equipment replacement.Pipeline Testing: When pressure or leak testing of pipelines is required, 8 Stainless Steel Blind Flange can be used to install test equipment.
Contact Now
Product Features1. Strong corrosion resistance: The stainless steel blind flange has excellent corrosion resistance and can resist corrosion and erosion of various chemical media. 2. Good sealing: The stainless steel blind flange adopts a flat sealing structure, which is tightly connected, and the sealing performance is stable and reliable. 3. Easy installation: The stainless steel blind flange adopts a standardized design, which is convenient and fast to install without special tools and techniques.
Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.
العربية
Русский
日本語
Italiano
