Flat Face Flange-manufacture,factory,supplier from China
(Total 24 Products for Flat Face Flange)
Product Advantages2.Easy installation and maintenance: The installation process of carbon steel flat flange is relatively simple, and the connection can be completed without using special tools. Moreover, when the piping system needs maintenance or replacement, the disassembly of the flat flange is relatively easy.3.Strong applicability: carbon steel flat face flanges can be used in many different pipeline connections, including high pressure, high temperature and low temperature pipeline systems.
Contact Now
Reducing flange (also known as large and small flange) is a flange connected to a standard flange, but the nominal diameter of the pipe is smaller than the nominal diameter of the standard flange. Full-face flange: The sealing surface and the entire flange surface are in the same plane.Boss surface flange: The sealing surface is slightly higher than the entire flange surface. Concave and convex surface flanges: A pair of flanges, the sealing surfaces of which are concave and convex.Tongue and groove face flange: A pair of flanges have a sealing surface, one with a tenon and the other
Contact Now
Product Advantages1. Strong corrosion resistance: stainless steel flat flanges can be used in various environments with corrosive media such as strong acids, weak acids, salts, and oxidants. 2. Good high temperature resistance: stainless steel flat flange has good high temperature resistance and can be used for a long time under high temperature conditions. 3. High hardness: The stainless steel flat flange has high strength and high hardness, is not easy to deform, and has a long service life. 4.
Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Flat flange standard system1) Nominal pressure: 0.25Mpa~42.0Mpaa. Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series)b.
Contact Now
The main production processes are mainly divided into four types: forging, casting, cutting and rolling.The cast flange has accurate rough shape and size, small processing volume, and low cost, but it has casting defects (pores, cracks, inclusions); the internal structure of the casting has poor streamlined structure (if it is a cutting part, the streamlined shape is even worse);Forged flanges have low carbon content and are generally less likely to rust than cast flanges.
Contact Now
The full name of die forging is die forging. The heated blank is placed in a forging die fixed on the die forging equipment and is forged into shape. The basic processes of die forging: blanking, heating, pre-forging, final forging, skin punching, trimming, tempering, and shot blasting. Commonly used processes include upsetting, lengthening, bending, punching, and forming. Commonly used die forging equipment: die forging hammer, hot die forging press, flat forging machine and friction press, etc.
Contact Now
AdvantageGood sealing: The flange connection adopts two methods: face-to-face sealing and comprehensive sealing, making the sealing more reliable. In addition, sealing gaskets are made of different materials, such as rubber, polytetrafluoroethylene, etc., which have good sealing properties and can prevent fluid leakage.Application ScenariosBuilding pipe connection: Carbon steel flange is a common pipe connection method, which is often used to connect water, heating, air conditioning and other piping systems in buildings.
Contact Now
Large diameter series, stainless steel series, carbon steel series, alloy steel series, our factory's main products include: neck flange, butt welding flange, plate flat welding flange, flat flange flat welding ring loose flange, Welding ring loose flange, integral flange, forged flange, flange cover, please call us for inquiries and look forward to cooperating with you.The execution standards of butt welding flanges are: chemical standard HG20592-2010, national standard GB/T9119, petrochemical standard SH/T3046, mechanical standard JB/T81-94, etc.
Contact Now
The forging process generally consists of the following steps, namely, selecting high-quality steel billets for blanking, heating, forming, and cooling after forging. The forging process methods include free forging, die forging and membrane forging. During production, different forging methods are selected according to the quality of the forgings and the size of the production batch.Free forging has low productivity and large machining allowance, but the tools are simple and versatile, so it is widely used for forging single pieces with simple shapes and small batch production of forgings.
Contact Now
American standard carbon steel flange neck flat welding flange SO flange ensures qualityIn pipeline engineering, flanges are mainly used for the connection of pipelines. In the pipelines that need to be connected, install a flange. Low-pressure pipelines can use wire flanges, and welding flanges can be used with pressures above 4 kg. Add a sealing point between the two flanges and tighten them with bolts. Flanges for different pressures have different thicknesses and use different bolts.
Contact Now
During free forging, the shape of the forging is gradually forged from the blank through some basic deformation processes. The basic processes of free forging include upsetting, drawing, punching, bending and cutting.Upsetting. Upsetting is an operation process of forging the original blank along the axial direction to reduce its height and increase its cross-section. This process is commonly used for forging gear blanks and other disc-shaped forgings. Upsetting is divided into two types: total upsetting and partial forging. Pull out.
Contact Now
Application Scenarios:Machinery and equipment field: In the assembly process of machinery and equipment, flat flange nuts are often used as fasteners to connect metal plates. Due to its simple structure, easy installation and good sealing effect, flat flange nuts are widely used in the assembly of circuit boards, automobile body panels and other panels.Automobile manufacturing field: In the assembly process of automobile manufacturing, the use of flat flange nuts as frame fasteners is very common.
Contact Now
The neck flat welded flange, like the plate flat welded flange, is also a flange that extends the steel pipe, pipe fittings, etc. into the flange and connects with the equipment or pipe through the fillet weld.2, sealing formThe sealing surface forms of flat welded flange with neck are:Convex surface (RF), concave surface (FM), convex surface (M), tenon surface (T), groove surface (G), full plane (FF).Diameter range of neck flat welded flange: DN10~DN600.3.
Contact Now
Flat welding flange connection is the two pipes, pipe fittings or equipment, first fixed on a flange, between the two flanges, plus flange pad, bolted together to complete the connection. Some pipe fittings and equipment have their own flanges, which are also flange connections. Flat welded flanges are divided into threaded connection (wire connection) flanges and welded flanges. Low pressure small diameter wire flange, high pressure and low pressure large diameter are welded flange, different pressure flange thickness and connection bolt diameter and number are different.
Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.
Contact Now
The first thing to look at is the height of the protrusion (convex surface), and the second thing is to see whether there is an anti-slip ring on the protruding surface (convex surface). The former is, but the latter is not. Moreover, the two flange connection forms are also different.
Contact Now
Flat welded flange with neck belongs to the national standard flange system. It is one of the manifestations of the national standard flange (also known as GB flange), and is one of the commonly used flanges on equipment or pipelines. The neck height of flat welded flange with neck is low, which improves the stiffness and bearing capacity of the flange.
Contact Now
There are various types of sealing surfaces available for carbon steel blind flanges, including flat, raised, recessed/raised, tongue-and-groove, and ring joint faces. The choice depends on the specific circumstances.The purpose of carbon steel blind flanges is to completely isolate the production medium, preventing it from leaking out due to incomplete closure of the cut-off valve. They are commonly used at the ends of equipment connections, before and after cut-off valves, or between two flanges.When using carbon steel blind flanges, attention should be paid to their maintenance and upkeep.
Contact Now
Product Features1. Strong corrosion resistance: The stainless steel blind flange has excellent corrosion resistance and can resist corrosion and erosion of various chemical media. 2. Good sealing: The stainless steel blind flange adopts a flat sealing structure, which is tightly connected, and the sealing performance is stable and reliable. 3. Easy installation: The stainless steel blind flange adopts a standardized design, which is convenient and fast to install without special tools and techniques.
Contact Now
Installation precautionsThe tightening force of carbon steel flanges should be uniform and consistent, and the compression amount of the rubber pad should be controlled at around 1/3.When installing carbon steel flanges, it is necessary to ensure that the sealing surface of the flange is flat and clean. During installation, oil stains and rust spots should be carefully cleaned.About UsThe company has many years of production experience in the forging industry and has accumulated years of processing foundation for metal products with high precision requirements and special technical content.
Contact Now
The SA-105 flange is typically made of high-chromium and nickel stainless steel, which exhibits excellent corrosion resistance. The main chemical components include chromium (Cr), nickel (Ni), and molybdenum (Mo), which together enhance the material's corrosion resistance and mechanical strength.The SA-105 flange has high tensile strength and yield strength, enabling it to withstand high pressure and vibration.
Contact Now
Application Scenarios:Oil and natural gas industry: In the extraction, storage, transportation, processing and use of oil and natural gas, a large number of flange connections are often required, such as oil wells, pipelines, oil tanks, storage tanks, etc.
Contact Now
The sliding flange is mainly composed of flange, gasket, bolt and so on. Among them, the size parameters of the flange include outer diameter, aperture, groove depth, groove width, etc. The size parameters of the gasket include inner diameter, outer diameter, thickness, etc. In addition, the diameter, length and other parameters of the bolt are also very important, which determine the installation method and sealing effect of the entire sliding flange.
Contact Now
The welding end flange has multiple functions, the main ones being:Connecting pipe: Welding end flanges are commonly used parts in pipe connection, which can connect two pipes together to form a closed transmission system.Sealing medium: The sealing performance of the welding end flange is good, which can effectively prevent medium leakage and ensure the sealing performance of the pipeline system.Support and fixing: The welded end flange has high connection strength and can withstand large pressures and loads.
Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.