Flange With Socket-manufacture,factory,supplier from China

(Total 24 Products for Flange With Socket)
Application Scenarios:Power industry: Various thermal and steam pipelines in the power industry need to be connected using socket welding flanges to ensure the safety and stability of the pipelines.Pharmaceutical industry: Various drugs and materials in the pharmaceutical industry need to be transported through pipelines, and socket welding flanges are the ideal choice for connecting these pipelines.Shipbuilding: Shipbuilding involves a large number of pipeline connections, and socket welding flanges play an important role in these pipeline connections.Mechanical manufacturing: Various pipelin
  Contact Now
The socket flange is a connecting pipe fitting, usually composed of two inner and outer sleeves and a rubber sealing ring in the middle. The flange surface of the outer sleeve is connected to other pipe fittings. The inner sleeve and the outer sleeve are connected by a soft sealing ring. It has good elasticity, so it is suitable for vibration and vibration caused by the pipeline during use. Displacement situations.The connection method of the socket flange is simple and convenient. There is no need to use accessories such as bolts or nuts.
  Contact Now
Stainless steel socket flange is a commonly used pipe connection method, which has the following characteristics: 1. Wide applicability: Stainless steel socket flanges are suitable for pipe connections of different materials, diameters and pressure levels.
  Contact Now
Pipe connection: Socket flanges can be used for connecting pipes of different materials, sizes, and types, such as in the pipeline systems of the petroleum, natural gas, and other industries.Water treatment equipment connection: Socket flanges can also be used to connect water treatment equipment, such as water purifiers and filters, to ensure water quality while facilitating maintenance and replacement of equipment.Pipeline system in the food industry: Due to the high requirements for pipeline systems in the food industry, both hygiene and safety issues need to be considered.
  Contact Now
Socket flanges are a type of connecting pipe fitting, which are formed by inserting the end of a pipe into a flange ring ladder and welding it to the pipe end and outer side. Depending on whether there is a neck, socket flanges are divided into two types: with and without a neck.Socket flanges are mainly used for pipe connection. Due to their structural characteristics, they have good rigidity and sealing performance and can be used in applications with pressures ranging from 1.0 to 10.0 MPa.
  Contact Now
The manufacturing process of carbon steel socket flange generally includes the following steps:1.Material procurement: First of all, high-quality carbon steel plates need to be purchased, cut and processed according to specifications and requirements.2.Punching: Punch the processed carbon steel plate for inserting the flange.3.Bending: Bending the punched carbon steel plate into the shape of the socket flange.4.Welding: Weld the bent plate to fix it into the shape of the socket flange.5.Surface treatment: The surface of the welded socket flange is polished and anti-rust to increase its corrosi
  Contact Now
High strength and corrosion resistance: A694 F60 has high strength and corrosion resistance, making it suitable for extremely harsh marine working environments with high salinity, high pressure, and high impact.
  Contact Now
Flanges are disk-shaped parts, the most common in pipeline engineering, flanges are used in pairs and with matching flanges on valves. In pipeline engineering, flanges are mainly used for pipeline connection. In the need to connect the pipe, a variety of mounting flanges, low pressure pipes can use wire flanges, more than 4 kg of pressure using welded flanges. Put a gasket between the two flanges and fasten them with bolts.
  Contact Now
High strength: A105N flange is made of high-quality low-carbon steel material, precision forging and processing, with high mechanical strength and wear resistance, able to withstand large pressure and vibration.Corrosion resistance: Due to the addition of nickel and chromium elements in the A105N material, it has excellent corrosion resistance and can be used in various corrosive environments.Interchangeability: The design and manufacturing of A105N flanges comply with standard specifications, allowing them to be interchangeable with other brands or types of flanges of the same specification.
  Contact Now
The welding end flange is a pipe fitting used to connect pipes with pipes, pipes with fittings, pipes with equipment, etc. It is a disc-shaped part that is most commonly used in pipeline engineering. The welding end flange has holes, and bolts are used to tightly connect the two flanges, with gaskets between them for sealing. The welding end flange connection is a convenient and fast connection method that can withstand high pressure and is widely used in the fields of petroleum, chemical, natural gas, power station, metallurgical pipeline, etc.
  Contact Now
Free forging has low productivity and large machining allowance, but the tools are simple and versatile, so it is widely used for forging single pieces with simple shapes and small batch production of forgings. Free forging equipment includes air hammers, steam-air hammers and hydraulic presses, which are suitable for the production of small, medium and large forgings respectively. Die forging has high productivity, simple operation, and easy mechanization and automation.
  Contact Now
The forging process generally consists of the following steps, namely, selecting high-quality steel billets for blanking, heating, forming, and cooling after forging. The forging process methods include free forging, die forging and membrane forging. During production, different forging methods are selected according to the quality of the forgings and the size of the production batch.Free forging has low productivity and large machining allowance, but the tools are simple and versatile, so it is widely used for forging single pieces with simple shapes and small batch production of forgings.
  Contact Now
ASTM A694 is a standard specification for high-strength steel and alloy steel castings, used in industrial applications where temperatures exceed -20°C. It provides guidance for the material properties, physical testing methods, and acceptance criteria for castings used in various applications, including pressure vessels, boilers, and other high-temperature equipment.ASTM A694 covers a range of material grades with different mechanical properties, such as yield strength, tensile strength, impact toughness, and fatigue resistance.
  Contact Now
The neck flat welded flange, like the plate flat welded flange, is also a flange that extends the steel pipe, pipe fittings, etc. into the flange and connects with the equipment or pipe through the fillet weld.2, sealing formThe sealing surface forms of flat welded flange with neck are:Convex surface (RF), concave surface (FM), convex surface (M), tenon surface (T), groove surface (G), full plane (FF).Diameter range of neck flat welded flange: DN10~DN600.3.
  Contact Now
Flat welded flange with neck belongs to the national standard flange system. It is one of the manifestations of the national standard flange (also known as GB flange), and is one of the commonly used flanges on equipment or pipelines. The neck height of flat welded flange with neck is low, which improves the stiffness and bearing capacity of the flange.
  Contact Now
High neck flange: compared with the butt welding flange, the welding workload is large, the welding rod consumption is high, can not withstand high temperature and high pressure and repeated bending and temperature fluctuations, but the field installation is more convenient, can omit the weld film detection process, and is more popular.
  Contact Now
American standard carbon steel flange neck flat welding flange SO flange ensures qualityIn pipeline engineering, flanges are mainly used for the connection of pipelines. In the pipelines that need to be connected, install a flange. Low-pressure pipelines can use wire flanges, and welding flanges can be used with pressures above 4 kg. Add a sealing point between the two flanges and tighten them with bolts. Flanges for different pressures have different thicknesses and use different bolts.
  Contact Now
Special-shaped flange is a kind of pipeline connection flange, which has the following advantages in different pipeline systems:1.Strong adaptability: special-shaped flanges can be customized according to the needs of the pipeline system with flanges of various specifications, shapes and materials to meet different pipeline connection requirements.2.Good maintainability: When the pipeline system needs to be inspected, maintained and replaced, the special-shaped flange can provide convenient disassembly and installation, so as to reduce downtime maintenance time and reduce maintenance costs.3.H
  Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.
  Contact Now
ASTM A350 LF2 CL1 is a low-temperature carbon steel material commonly used in the manufacturing of valves and pipeline connectors. It has excellent weldability and strength, making it suitable for use in low-temperature environments. The main chemical components include carbon, manganese, silicon, phosphorus, sulfur, and nickel, with the nickel content controlled at a maximum of 0.40%.
  Contact Now
Packaging And Shipping:Blind Flange Carbon Steel is packed in wooden boxes, with foam shock absorbers placed inside each wooden box to prevent damage to the flanges during transportation.The Blind Flange Carbon Steel is fixed in the wooden box, and the four corners are protected with foam shock-absorbing pads.After the Blind Flange Carbon Steel is packed in wooden boxes, it is placed in a container and protected with foam shock-absorbing pads around it to ensure that the flange will not move or collide during transportation.When loading and unloading, it is necessary to use tools such as
  Contact Now
Product Advantages1. Strong corrosion resistance: stainless steel flat flanges can be used in various environments with corrosive media such as strong acids, weak acids, salts, and oxidants. 2. Good high temperature resistance: stainless steel flat flange has good high temperature resistance and can be used for a long time under high temperature conditions. 3. High hardness: The stainless steel flat flange has high strength and high hardness, is not easy to deform, and has a long service life. 4.
  Contact Now
 ASTM A694 F65 rotating flanges are typically made of carbon steel, whose chemical composition includes carbon (C), silicon (Si), manganese (Mn), sulfur (S), and phosphorus (P). Carbon steel, with its high carbon content, is an alloy steel that exhibits excellent strength and corrosion resistance.Mechanical properties: ASTM A694 F65 rotating flanges possess excellent mechanical properties, capable of withstanding working conditions under high pressure and high temperature.
  Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Flat flange standard system1) Nominal pressure: 0.25Mpa~42.0Mpaa. Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series)b.
  Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.