Carbon Steel Lap Joint Flange-manufacture,factory,supplier from China
(Total 24 Products for Carbon Steel Lap Joint Flange)
Transportation Precautions:Make sure the flange is not moved or bumped during transportation to avoid damage.If container transportation is used, the flange needs to be placed in the container and the sealing of the container must be ensured.If transported by bulk carrier, the flange needs to be placed at the designated location on the cargo ship and the stability of the cargo ship must be ensured.During transportation, you need to pay attention to weather and road conditions to avoid affecting transportation safety.About UsWelcome to Shandong Xinyi Intelligent Manufacturing Co., Ltd.
Contact Now
There are various types of sealing surfaces available for carbon steel blind flanges, including flat, raised, recessed/raised, tongue-and-groove, and ring joint faces. The choice depends on the specific circumstances.The purpose of carbon steel blind flanges is to completely isolate the production medium, preventing it from leaking out due to incomplete closure of the cut-off valve. They are commonly used at the ends of equipment connections, before and after cut-off valves, or between two flanges.When using carbon steel blind flanges, attention should be paid to their maintenance and upkeep.
Contact Now
Carbon steel flange is a common pipeline connection component, mainly used to connect two pipelines and achieve sealing and stability between the pipelines. It is mainly made of carbon steel, so it has good corrosion resistance and high temperature resistance, and can be used in various harsh environments.The main feature of carbon steel flanges is their stable and reliable connection, able to withstand large pressure and vibration. Additionally, they have good flexibility, able to absorb pipeline expansion and contraction, preventing pipeline ruptures.
Contact Now
The strength of carbon steel material itself is very hard, so it is also very common in application, many links between pipe fittings will be used to carbon steel flange, want to reasonably change the link of pipe fittings, carbon steel flange is a better choice.Carbon steel flange used in the field is more special, so it requires the material to be smooth and other characteristics, it can be used in a high pressure environment without distortion.
Contact Now
Carbon steel sliding flanges usually have the following characteristics:1.Material: Carbon steel sliding flanges are usually made of high-quality carbon structural steel materials.
Contact Now
Carbon steel flanges, also known as carbon steel flanges, are flanges or end flange connections whose body material is carbon steel. Flanges made of carbon steel are commonly referred to as carbon steel flanges. Common materials include cast carbon steel grades WCB, forgings A105, or Q235B, A3, 10#, #20 steel, 16manganese, 45# steel, Q345B, etc. Usually, to prevent rust, the flange surface is plated (yellow zinc, white zinc, etc.), or treated with anti-rust oil and anti-rust paint.
Contact Now
Application Scenarios:Petrochemical industry: Carbon steel flanged fittings are used to connect various petrochemical equipment, such as oil pipelines, steam pipelines, chemical equipment, etc.Electric power industry: Carbon steel flanged fittings are commonly used in pipelines transporting water, gas and oil in the electric power industry, as well as valves, pumps and other equipment.Water treatment industry: Carbon steel flanged fittings are commonly used in water supply, sewage treatment, boiler water treatment, and industrial water pipes.Construction industry: Carbon steel flanged fittings
Contact Now
Product Advantages2.Easy installation and maintenance: The installation process of carbon steel flat flange is relatively simple, and the connection can be completed without using special tools. Moreover, when the piping system needs maintenance or replacement, the disassembly of the flat flange is relatively easy.3.Strong applicability: carbon steel flat face flanges can be used in many different pipeline connections, including high pressure, high temperature and low temperature pipeline systems.
Contact Now
The 16mn in the 16mn flange is made of carbon steel metal and is a low alloy flange. It has the advantages of good overall performance, good low temperature performance, cool stamping performance, welding performance, and good machinability. Widely used in water conservancy, electric power, power stations, pipe fittings, industry, pressure vessels and other industries.
Contact Now
The manufacturing process of carbon steel socket flange generally includes the following steps:1.Material procurement: First of all, high-quality carbon steel plates need to be purchased, cut and processed according to specifications and requirements.2.Punching: Punch the processed carbon steel plate for inserting the flange.3.Bending: Bending the punched carbon steel plate into the shape of the socket flange.4.Welding: Weld the bent plate to fix it into the shape of the socket flange.5.Surface treatment: The surface of the welded socket flange is polished and anti-rust to increase its corrosi
Contact Now
Blind flange carbon steel is a pipe connecting component used to close the end or intermediate section of a piping system. It is made of carbon steel material and has excellent mechanical properties and corrosion resistance.The main function of Blind Flange Carbon Steel is to provide a reliable seal to prevent leakage of the medium inside the pipeline.
Contact Now
They are: Class 150; Class 300; Class 600; Class 900; Class 1500; Class 2500Another meaning of carbon steel flange is: According to the national standard requirements of the size, tolerance range and other production flanges, different from the production of flanges not according to the standard size is also called two standard flanges (some people called non-standard flanges is incorrect), usually some unprofitable businesses will reduce the thickness of the flanges, two dimensions of the outer diameter to achieve the purpose of saving materials, and waste steel or scrap steel processing flan
Contact Now
Packaging And Shipping:Blind Flange Carbon Steel is packed in wooden boxes, with foam shock absorbers placed inside each wooden box to prevent damage to the flanges during transportation.The Blind Flange Carbon Steel is fixed in the wooden box, and the four corners are protected with foam shock-absorbing pads.After the Blind Flange Carbon Steel is packed in wooden boxes, it is placed in a container and protected with foam shock-absorbing pads around it to ensure that the flange will not move or collide during transportation.When loading and unloading, it is necessary to use tools such as
Contact Now
Matters Needing Attention:Before installation, it is necessary to clean the sliding flange accordingly to ensure that its surface is free of dirt and damage, in order to avoid leakage or damage during or after installation.During the installation process, carbon steel sliding flanges need to be classified according to corresponding specifications and standards, and installed according to the instructions or specifications. If sealing gasket is required, it shall be selected with good oil resistance and anti-aging performance, and its installation shall be correct.
Contact Now
AdvantageGood sealing: The flange connection adopts two methods: face-to-face sealing and comprehensive sealing, making the sealing more reliable. In addition, sealing gaskets are made of different materials, such as rubber, polytetrafluoroethylene, etc., which have good sealing properties and can prevent fluid leakage.Application ScenariosBuilding pipe connection: Carbon steel flange is a common pipe connection method, which is often used to connect water, heating, air conditioning and other piping systems in buildings.
Contact Now
Application ScenariosPipeline connection: The sealing connection of the pipeline is achieved by welding the pipe ends of two sections of the pipeline with carbon steel flanges, and then connecting the two flanges with bolts.Valve installation: In valve installation, the inlet and outlet ends of the valve are connected to the pipe ends of the pipeline through carbon steel flanges, which can achieve the cutting and adjustment of the pipeline medium.About UsShandong Xinyi Intelligent Manufacturing Co., Ltd. is located in Zhangqiu, Shandong, the hometown of Chinese blacksmiths.
Contact Now
Forged Carbon Steel Flanges are an important mechanical component made primarily from carbon steel material through forging processes. This type of flange has high strength and toughness, capable of withstanding significant pressure and impact, making it suitable for harsh environments such as high pressure and high temperature.In addition, Forged Carbon Steel Flanges also have good corrosion resistance and can adapt to various corrosive media.
Contact Now
Installation PrecautionsWhen installing carbon steel flanges, it is necessary to use good gaskets and choose gasket products with oil resistance and anti-aging properties to maintain a long-lasting effect. At the same time, gaskets of different sizes and shapes should be used according to the shape of the connection place, so as to achieve the best effect.During the installation process, the apron is an indispensable accessory, and it must be placed correctly.
Contact Now
Installation precautionsThe tightening force of carbon steel flanges should be uniform and consistent, and the compression amount of the rubber pad should be controlled at around 1/3.When installing carbon steel flanges, it is necessary to ensure that the sealing surface of the flange is flat and clean. During installation, oil stains and rust spots should be carefully cleaned.About UsThe company has many years of production experience in the forging industry and has accumulated years of processing foundation for metal products with high precision requirements and special technical content.
Contact Now
Carbon steel pipe flanges are a type of connecting piece widely used in piping systems to connect pipes, valves, pumps, and other equipment. They are typically made of carbon steel material, which has good strength and rigidity and can withstand high pressures and loads.The main function of carbon steel pipe flanges is to provide reliable connection and sealing, ensuring the normal operation and safety of pipeline systems.
Contact Now
Product Advantages1.Leakage Prevention: Carbon steel blind flanges can block the holes in the pipeline to prevent the leakage of media, gas or liquid, and ensure the safe operation of the pipeline system.2.Cleanliness of the pipeline system: When the pipeline system needs to be cleaned or stopped, the use of carbon steel blind flanges can prevent pollutants in the pipeline from entering the pipeline system and ensure the cleanliness of the pipeline system.3.High flexibility in use: carbon steel blind flange does not require the center hole of the pipeline system and the connection of the pipel
Contact Now
A350 Gr Lf2 Cl1 is a low-temperature carbon steel material that is primarily used in the manufacturing of valves, pipeline connectors, and fittings for use in cryogenic environments. It exhibits good weldability and strength, enabling it to maintain stable mechanical properties in low-temperature environments.The primary chemical composition of A350 Gr Lf2 Cl1 includes carbon, manganese, silicon, phosphorus, and sulfur. The content and ratio of these elements determine the mechanical properties and corrosion resistance of the material.
Contact Now
ASTM A694 F65 rotating flanges are typically made of carbon steel, whose chemical composition includes carbon (C), silicon (Si), manganese (Mn), sulfur (S), and phosphorus (P). Carbon steel, with its high carbon content, is an alloy steel that exhibits excellent strength and corrosion resistance.Mechanical properties: ASTM A694 F65 rotating flanges possess excellent mechanical properties, capable of withstanding working conditions under high pressure and high temperature.
Contact Now
Carbon steel blind flanges are a common type of pipeline connection component, mainly used to connect two pipelines and achieve sealing and stability between the pipelines. They are mainly made of carbon steel, which gives them good corrosion resistance and high temperature resistance, enabling them to be used in various harsh environments.The main characteristics of carbon steel blind flanges are their stable and reliable connection, able to withstand large pressure and vibration.
Contact Now
Relate News
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
العربية
Русский
日本語
Italiano
