Carbon Steel Flange Connected To Stainless Steel Flange-manufacture,factory,supplier from China
(Total 24 Products for Carbon Steel Flange Connected To Stainless Steel Flange)
Stainless steel metal building materials are one of the strongest materials. Because stainless steel has good corrosion resistance and can maintain the integrity of the design. Therefore, stainless steel flanges also have mechanical strength and high ductility, and are easy to process and manufacture. Meet the structural development requirements of architects and designers.
Contact Now
Product Features1. Wide applicability: The stainless steel sliding flange can be applied to a variety of fluid media, such as water, gas, oil, etc., and can be connected to pipes and equipment of different materials, which has strong versatility. 2. High reliability: the stainless steel sliding flange is tightly connected, has good sealing performance, is not prone to leakage and loosening, and has high stability and reliability.
Contact Now
Product Features：1. Corrosion resistance: The stainless steel material itself already has the characteristics of corrosion resistance, so the stainless steel high neck flange can avoid rust, corrosion and other problems in a highly corrosive environment. 2. High strength: Stainless steel high neck flanges are usually made of high-quality 304/316L and other stainless steel materials, so they have good strength and pressure resistance. 3. Good integrity: Stainless steel high neck flanges usually adopt integral molding or forging structure during production.
Contact Now
The working principle of the stainless steel flange is to connect two pairs of stainless steel flanges to the pipe port to be connected, and then the two pipes are connected to the flange, why not directly connect, but use such an intermediate, what role does the stainless steel flange play in it?First of all, the interface is often very fragile, flange can maintain high sealing and durability; Secondly, if the threaded connection flange is used, it is easier to replace the damaged pipe that needs to be replaced, or it is easier to remove when diverting; Third, the flange also has an important
Contact Now
Stainless steel socket flange is a commonly used pipe connection method, which has the following characteristics: 1. Wide applicability: Stainless steel socket flanges are suitable for pipe connections of different materials, diameters and pressure levels.
Contact Now
Product Advantages1. Strong corrosion resistance: stainless steel flat flanges can be used in various environments with corrosive media such as strong acids, weak acids, salts, and oxidants. 2. Good high temperature resistance: stainless steel flat flange has good high temperature resistance and can be used for a long time under high temperature conditions. 3. High hardness: The stainless steel flat flange has high strength and high hardness, is not easy to deform, and has a long service life. 4.
Contact Now
Product Features1. Strong corrosion resistance: The stainless steel blind flange has excellent corrosion resistance and can resist corrosion and erosion of various chemical media. 2. Good sealing: The stainless steel blind flange adopts a flat sealing structure, which is tightly connected, and the sealing performance is stable and reliable. 3. Easy installation: The stainless steel blind flange adopts a standardized design, which is convenient and fast to install without special tools and techniques.
Contact Now
Product Application ScenarioIndustrial pipeline connection: 8 Stainless Steel Blind Flange is used in industrial fields to connect pipe segments of piping systems, such as petroleum, food processing, pharmaceutical and water treatment industries. This is often used to close or plug pipes to allow repairs, cleaning or equipment replacement.Pipeline Testing: When pressure or leak testing of pipelines is required, 8 Stainless Steel Blind Flange can be used to install test equipment.
Contact Now
Product Features1.High corrosion resistance: 10 Stainless Steel Blind Flange has excellent corrosion resistance, allowing for long-term stable use in harsh environments without being easily affected by corrosion and oxidation.2.High strength and durability: 10 Stainless Steel Blind Flange has high strength and durability, capable of withstanding high pressure and temperature requirements, resulting in a long service life.3.Good hygiene performance: 10 Stainless Steel Blind Flange is easy to clean and does not harbor bacteria and dirt, making it particularly suitable for applications in the foo
Contact Now
Stainless steel flanges also have high strength and durability. Stainless steel material has good mechanical properties, so that the flange can withstand greater pressure and tension, to ensure the stability and safety of the pipeline system. Stainless steel flanges can also be used for a long time without easy damage, reducing the frequency of maintenance and replacement, and reducing the cost of use.When selecting stainless steel flanges, it is necessary to take into account the working conditions and requirements of the piping system.
Contact Now
Application Scenarios:Power industry: Various thermal and steam pipelines in the power industry need to be connected using socket welding flanges to ensure the safety and stability of the pipelines.Pharmaceutical industry: Various drugs and materials in the pharmaceutical industry need to be transported through pipelines, and socket welding flanges are the ideal choice for connecting these pipelines.Shipbuilding: Shipbuilding involves a large number of pipeline connections, and socket welding flanges play an important role in these pipeline connections.Mechanical manufacturing: Various pipelin
Contact Now
1, stainless steel flange in welding, subject to repeated heating precipitation carbide, will reduce the corrosion resistance and mechanical properties of stainless steel flange.2, stainless steel flanges should be kept dry when used, titanium calcium type should be dried at 150℃ for 1 hour, low a hydrogen type should be dried at 200-250℃ for 1 hour (can not be repeated drying, otherwise the coating is easy to crack and peel), to prevent the electrode coating sticky oil and other dirt, so as not to increase the carbon content of the weld and affect the quality of stainless steel flanges.3, chr
Contact Now
Stainless steel flanges are widely used in petroleum, chemical, aerospace, light industry and other fields. Its main role is to connect pipes and equipment, so that it can effectively transfer a variety of fluid media. At the same time, the stainless steel flange also has good corrosion resistance and corrosion resistance, and has high use value.Fourth, stainless steel flange manufacturing materialsThe manufacturing materials of stainless steel flange are usually 304, 316, 316L and other stainless steel materials, as well as titanium, metal nickel and so on.
Contact Now
The socket flange is a connecting pipe fitting, usually composed of two inner and outer sleeves and a rubber sealing ring in the middle. The flange surface of the outer sleeve is connected to other pipe fittings. The inner sleeve and the outer sleeve are connected by a soft sealing ring. It has good elasticity, so it is suitable for vibration and vibration caused by the pipeline during use. Displacement situations.The connection method of the socket flange is simple and convenient. There is no need to use accessories such as bolts or nuts.
Contact Now
Reducing flange (also known as large and small flange) is a flange connected to a standard flange, but the nominal diameter of the pipe is smaller than the nominal diameter of the standard flange. Full-face flange: The sealing surface and the entire flange surface are in the same plane.Boss surface flange: The sealing surface is slightly higher than the entire flange surface. Concave and convex surface flanges: A pair of flanges, the sealing surfaces of which are concave and convex.Tongue and groove face flange: A pair of flanges have a sealing surface, one with a tenon and the other
Contact Now
Application ScenariosPipeline connection: The sealing connection of the pipeline is achieved by welding the pipe ends of two sections of the pipeline with carbon steel flanges, and then connecting the two flanges with bolts.Valve installation: In valve installation, the inlet and outlet ends of the valve are connected to the pipe ends of the pipeline through carbon steel flanges, which can achieve the cutting and adjustment of the pipeline medium.About UsShandong Xinyi Intelligent Manufacturing Co., Ltd. is located in Zhangqiu, Shandong, the hometown of Chinese blacksmiths.
Contact Now
The material of the welding end flange can be selected according to the application requirements and working environment. Common materials include carbon steel, stainless steel, and alloy steel.Carbon steel welding flanges have good corrosion resistance and toughness, and are suitable for low-pressure and low-temperature media such as air, water, and petroleum. Stainless steel welding flanges have good corrosion resistance and high temperature performance, and are suitable for media with high corrosion resistance requirements, such as acids, alkalis, and seawater.
Contact Now
1, industrial pipeline system: In the industrial field, flanges are widely used in all kinds of pipeline systems, such as chemical, oil, natural gas, food processing, etc. Through the flange connection, the different parts of the pipe can be closely connected, able to withstand high pressure and high temperature and other working environments, and ensure the normal transmission of fluids.2, valves and equipment connection: flanges are also used to connect valves, pumps, compressors, containers and other equipment.
Contact Now
Stainless steel flange is a common pipe connection, it is widely used in various industrial fields, including petroleum, chemical, food processing, pharmaceutical and so on. As an important part of the pipeline system, stainless steel flanges bear the function of connecting, sealing and supporting the pipeline.The stainless steel flange consists of two interconnected ring parts that are bolted together. These two ring parts are called flanges respectively, and they usually have a hole in the middle for connecting pipes.
Contact Now
Loose-jacketed flanges are commonly known as loose-jacketed flanges, partial welding ring loose-jacketed flanges, flanges flanges and butt welding loose-jacketed flanges. It is often used when the medium temperature and pressure are not high and the medium is highly corrosive. When the medium is corrosive, the part of the flange in contact with the medium (flanged nipple) is a corrosion-resistant high-grade material, such as stainless steel and other materials, and the external use of low-grade materials such as carbon steel materials to clamp it to achieve sealing.
Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.
Contact Now
The strength of carbon steel material itself is very hard, so it is also very common in application, many links between pipe fittings will be used to carbon steel flange, want to reasonably change the link of pipe fittings, carbon steel flange is a better choice.Carbon steel flange used in the field is more special, so it requires the material to be smooth and other characteristics, it can be used in a high pressure environment without distortion.
Contact Now
Carbon steel flange is a common pipeline connection component, mainly used to connect two pipelines and achieve sealing and stability between the pipelines. It is mainly made of carbon steel, so it has good corrosion resistance and high temperature resistance, and can be used in various harsh environments.The main feature of carbon steel flanges is their stable and reliable connection, able to withstand large pressure and vibration. Additionally, they have good flexibility, able to absorb pipeline expansion and contraction, preventing pipeline ruptures.
Contact Now
American standard carbon steel flange neck flat welding flange SO flange ensures qualityIn pipeline engineering, flanges are mainly used for the connection of pipelines. In the pipelines that need to be connected, install a flange. Low-pressure pipelines can use wire flanges, and welding flanges can be used with pressures above 4 kg. Add a sealing point between the two flanges and tighten them with bolts. Flanges for different pressures have different thicknesses and use different bolts.
Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
العربية
Русский
日本語
Italiano
