Butt Welded Flange-manufacture,factory,supplier from China

(Total 24 Products for Butt Welded Flange)
Butt welded flange is generally made by forging or forging rolling process. When the steel plate or section steel is used, the following requirements must be met: 1, welding flange should be ultrasonic detection, no delamination defects; 2. It should be cut into strips along the rolling direction of the steel, bent and welded into a ring, and make the surface of the steel form a cylinder of the ring. The steel plate shall not be machined directly into a neck butt welding flange; 3, the butt weld of the ring should adopt full penetration weld; 4.
  Contact Now
Flat welding flange connection is the two pipes, pipe fittings or equipment, first fixed on a flange, between the two flanges, plus flange pad, bolted together to complete the connection. Some pipe fittings and equipment have their own flanges, which are also flange connections. Flat welded flanges are divided into threaded connection (wire connection) flanges and welded flanges. Low pressure small diameter wire flange, high pressure and low pressure large diameter are welded flange, different pressure flange thickness and connection bolt diameter and number are different.
  Contact Now
The neck flat welded flange, like the plate flat welded flange, is also a flange that extends the steel pipe, pipe fittings, etc. into the flange and connects with the equipment or pipe through the fillet weld.2, sealing formThe sealing surface forms of flat welded flange with neck are:Convex surface (RF), concave surface (FM), convex surface (M), tenon surface (T), groove surface (G), full plane (FF).Diameter range of neck flat welded flange: DN10~DN600.3.
  Contact Now
Flanges are disk-shaped parts, the most common in pipeline engineering, flanges are used in pairs and with matching flanges on valves. In pipeline engineering, flanges are mainly used for pipeline connection. In the need to connect the pipe, a variety of mounting flanges, low pressure pipes can use wire flanges, more than 4 kg of pressure using welded flanges. Put a gasket between the two flanges and fasten them with bolts.
  Contact Now
High neck flange: compared with the butt welding flange, the welding workload is large, the welding rod consumption is high, can not withstand high temperature and high pressure and repeated bending and temperature fluctuations, but the field installation is more convenient, can omit the weld film detection process, and is more popular.
  Contact Now
Large diameter series, stainless steel series, carbon steel series, alloy steel series, our factory's main products include: neck flange, butt welding flange, plate flat welding flange, flat flange flat welding ring loose flange, Welding ring loose flange, integral flange, forged flange, flange cover, please call us for inquiries and look forward to cooperating with you.The execution standards of butt welding flanges are: chemical standard HG20592-2010, national standard GB/T9119, petrochemical standard SH/T3046, mechanical standard JB/T81-94, etc.
  Contact Now
Flat welded flange with neck belongs to the national standard flange system. It is one of the manifestations of the national standard flange (also known as GB flange), and is one of the commonly used flanges on equipment or pipelines. The neck height of flat welded flange with neck is low, which improves the stiffness and bearing capacity of the flange.
  Contact Now
The welding end flange has multiple functions, the main ones being:Connecting pipe: Welding end flanges are commonly used parts in pipe connection, which can connect two pipes together to form a closed transmission system.Sealing medium: The sealing performance of the welding end flange is good, which can effectively prevent medium leakage and ensure the sealing performance of the pipeline system.Support and fixing: The welded end flange has high connection strength and can withstand large pressures and loads.
  Contact Now
Loose-jacketed flanges are commonly known as loose-jacketed flanges, partial welding ring loose-jacketed flanges, flanges flanges and butt welding loose-jacketed flanges. It is often used when the medium temperature and pressure are not high and the medium is highly corrosive. When the medium is corrosive, the part of the flange in contact with the medium (flanged nipple) is a corrosion-resistant high-grade material, such as stainless steel and other materials, and the external use of low-grade materials such as carbon steel materials to clamp it to achieve sealing.
  Contact Now
The manufacturing process of carbon steel socket flange generally includes the following steps:1.Material procurement: First of all, high-quality carbon steel plates need to be purchased, cut and processed according to specifications and requirements.2.Punching: Punch the processed carbon steel plate for inserting the flange.3.Bending: Bending the punched carbon steel plate into the shape of the socket flange.4.Welding: Weld the bent plate to fix it into the shape of the socket flange.5.Surface treatment: The surface of the welded socket flange is polished and anti-rust to increase its corrosi
  Contact Now
The sliding flange is mainly composed of flange, gasket, bolt and so on. Among them, the size parameters of the flange include outer diameter, aperture, groove depth, groove width, etc. The size parameters of the gasket include inner diameter, outer diameter, thickness, etc. In addition, the diameter, length and other parameters of the bolt are also very important, which determine the installation method and sealing effect of the entire sliding flange.
  Contact Now
flange (flange) connection is the two pipes, fittings or equipment, first fixed in a flange flange, between the two flanges, plus flange pad, bolted together to complete the connection. Some pipe fittings and equipment have their own flanges, which are also flange connections. Flange connection is an important connection mode in pipeline construction. The flange connection is easy to use and can withstand greater pressure. In industrial pipes, in the home, the pipe diameter is small, and it is low pressure, and the flange connection is not visible.
  Contact Now
High strength: A105N flange is made of high-quality low-carbon steel material, precision forging and processing, with high mechanical strength and wear resistance, able to withstand large pressure and vibration.Corrosion resistance: Due to the addition of nickel and chromium elements in the A105N material, it has excellent corrosion resistance and can be used in various corrosive environments.Interchangeability: The design and manufacturing of A105N flanges comply with standard specifications, allowing them to be interchangeable with other brands or types of flanges of the same specification.
  Contact Now
Special-shaped flange is a kind of pipeline connection flange, which has the following advantages in different pipeline systems:1.Strong adaptability: special-shaped flanges can be customized according to the needs of the pipeline system with flanges of various specifications, shapes and materials to meet different pipeline connection requirements.2.Good maintainability: When the pipeline system needs to be inspected, maintained and replaced, the special-shaped flange can provide convenient disassembly and installation, so as to reduce downtime maintenance time and reduce maintenance costs.3.H
  Contact Now
Transportation Precautions:Make sure the flange is not moved or bumped during transportation to avoid damage.If container transportation is used, the flange needs to be placed in the container and the sealing of the container must be ensured.If transported by bulk carrier, the flange needs to be placed at the designated location on the cargo ship and the stability of the cargo ship must be ensured.During transportation, you need to pay attention to weather and road conditions to avoid affecting transportation safety.About UsWelcome to Shandong Xinyi Intelligent Manufacturing Co., Ltd.
  Contact Now
The working principle of the stainless steel flange is to connect two pairs of stainless steel flanges to the pipe port to be connected, and then the two pipes are connected to the flange, why not directly connect, but use such an intermediate, what role does the stainless steel flange play in it?First of all, the interface is often very fragile, flange can maintain high sealing and durability; Secondly, if the threaded connection flange is used, it is easier to replace the damaged pipe that needs to be replaced, or it is easier to remove when diverting; Third, the flange also has an important
  Contact Now
Reducing flange (also known as large and small flange) is a flange connected to a standard flange, but the nominal diameter of the pipe is smaller than the nominal diameter of the standard flange. Full-face flange: The sealing surface and the entire flange surface are in the same plane.Boss surface flange: The sealing surface is slightly higher than the entire flange surface. Concave and convex surface flanges: A pair of flanges, the sealing surfaces of which are concave and convex.Tongue and groove face flange: A pair of flanges have a sealing surface, one with a tenon and the other
  Contact Now
The welding end flange is a pipe fitting used to connect pipes with pipes, pipes with fittings, pipes with equipment, etc. It is a disc-shaped part that is most commonly used in pipeline engineering. The welding end flange has holes, and bolts are used to tightly connect the two flanges, with gaskets between them for sealing. The welding end flange connection is a convenient and fast connection method that can withstand high pressure and is widely used in the fields of petroleum, chemical, natural gas, power station, metallurgical pipeline, etc.
  Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.
  Contact Now
The SA-105 flange is typically made of high-chromium and nickel stainless steel, which exhibits excellent corrosion resistance. The main chemical components include chromium (Cr), nickel (Ni), and molybdenum (Mo), which together enhance the material's corrosion resistance and mechanical strength.The SA-105 flange has high tensile strength and yield strength, enabling it to withstand high pressure and vibration.
  Contact Now
Compared with the necked flange, the flat flange can be divided into carbon steel flat flange, stainless steel flat flange and alloy steel flat flange according to the material. The structural forms of flange include integral flange and unit flange.Flat flange standard system1) Nominal pressure: 0.25Mpa~42.0Mpaa. Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series)b.
  Contact Now
All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, oftentimes regarded as "flange", such as the connection of air waft pipe, this kind of elements can be regarded as "flange class parts".But this connection is totally a section of the equipment, such as the connection of the flange and the water pump, it is now now not right to identify the water pump "flange parts".
  Contact Now
1, industrial pipeline system: In the industrial field, flanges are widely used in all kinds of pipeline systems, such as chemical, oil, natural gas, food processing, etc. Through the flange connection, the different parts of the pipe can be closely connected, able to withstand high pressure and high temperature and other working environments, and ensure the normal transmission of fluids.2, valves and equipment connection: flanges are also used to connect valves, pumps, compressors, containers and other equipment.
  Contact Now
Product Features1. Wide applicability: The stainless steel sliding flange can be applied to a variety of fluid media, such as water, gas, oil, etc., and can be connected to pipes and equipment of different materials, which has strong versatility. 2. High reliability: the stainless steel sliding flange is tightly connected, has good sealing performance, is not prone to leakage and loosening, and has high stability and reliability.
  Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.