Astm A105 n-manufacture,factory,supplier from China
(Total 24 Products for Astm A105 n)
ASTM A694 is a standard specification for high-strength steel and alloy steel castings, used in industrial applications where temperatures exceed -20°C. It provides guidance for the material properties, physical testing methods, and acceptance criteria for castings used in various applications, including pressure vessels, boilers, and other high-temperature equipment.ASTM A694 covers a range of material grades with different mechanical properties, such as yield strength, tensile strength, impact toughness, and fatigue resistance.
Contact Now
ASTM A694 F70 is a high-strength, corrosion-resistant alloy steel, primarily used in applications that require both high strength and corrosion resistance. Such applications include petrochemical industries, marine engineering, power generation, and other energy-related fields. This steel contains a certain amount of alloy elements, including carbon, manganese, silicon, phosphorus, and sulfur, to enhance its mechanical properties and corrosion resistance.
Contact Now
SA105 B16 is a widely used low-alloy steel material in the manufacturing of valves and pipeline connection components. It has excellent mechanical properties, low-temperature resistance, and welding performance, able to meet the needs of various complex working environments.Through normalizing treatment, the tensile strength of SA105 B16 can reach the range of 485MPA to 655MPA, exhibiting good mechanical properties. It can undergo impact testing at -46°C, suitable for working in low-temperature environments.
Contact Now
ASTM A350 LF2 CL1 is a low-temperature carbon steel material that is primarily used in the manufacturing of valves, pipeline connectors, and fittings for cryogenic applications.The primary chemical composition of ASTM A350 LF2 CL1 includes carbon, manganese, silicon, phosphorus, and sulfur. The maximum nickel content is controlled at 0.40%.
Contact Now
ASTM A694 F70 belongs to the category of alloy structural steel, which is specifically designed for applications that require high strength and corrosion resistance. This steel contains a certain amount of alloy elements to enhance its mechanical properties and corrosion resistance. These alloy elements include, but are not limited to, carbon, manganese, silicon, phosphorus, sulfur, etc.ASTM A694 F70 exhibits good toughness at both room and high temperatures, as well as good weldability and machinability.
Contact Now
ASTM A694 F70 steel is specifically designed for applications that require high strength and corrosion resistance. This steel contains a certain amount of alloy elements to enhance its mechanical properties and corrosion resistance. These elements include, but are not limited to, carbon, manganese, silicon, phosphorus, sulfur, etc.ASTM A694 F70 steel exhibits good toughness at both room and high temperatures, as well as good weldability and machinability.
Contact Now
ASTM A694 F65 exhibits high tensile strength, yield strength, and hardness, while also possessing certain ductility and toughness. This allows it to withstand working conditions under high pressure and high temperature.Weldability: ASTM A694 F65 is easy to weld and has stable welding properties, facilitating processing and joining.Corrosion resistance: ASTM A694 F65 contains certain alloy elements that enhance its corrosion resistance, allowing it to be used in corrosive environments for long-term durability.
Contact Now
ASTM A694 F60 is a high-strength steel primarily used to manufacture flanges, fittings, valves, and parts in high-pressure transmission equipment. This steel has high yield strength and tensile strength, allowing it to withstand the effects of high pressure and harsh environments. Additionally, ASTM A694 F60 has good corrosion and wear resistance, ensuring long-term stable performance.Specifically, the chemical composition of ASTM A694 F60 requires a maximum carbon content of 0.26% and a maximum phosphorus content of 0.025%.
Contact Now
ASTM A350 LF2 CL1 is a low-temperature carbon steel material commonly used in the manufacturing of valves and pipeline connectors. It has excellent weldability and strength, making it suitable for use in low-temperature environments. The main chemical components include carbon, manganese, silicon, phosphorus, sulfur, and nickel, with the nickel content controlled at a maximum of 0.40%.
Contact Now
ASTM A694 F60 is a high-strength carbon steel used in high-pressure transmission equipment. It has excellent mechanical properties, including high strength, good toughness, and good corrosion resistance. This steel is commonly used to manufacture various components such as pipelines, containers, and supports, especially in the fields of high-pressure pipelines such as marine, oil, and natural gas.The yield strength of ASTM A694 F60 is twice that of austenitic stainless steel, which allows designers to reduce weight and thereby reduce costs when designing products.
Contact Now
Material: ASTM A694 F52 is a high-strength, corrosion-resistant alloy material with good tensile strength and yield limit, able to withstand high pressure and heavy loads. This material is composed of various elements such as chromium, nickel, and molybdenum, which together enhance the corrosion resistance and mechanical strength of the material.Connection: ASTM A694 F52 flanges can be reliably connected to piping and other equipment through welding, threaded connections, and other methods.
Contact Now
High strength: ASTM A694 Gr.F60 undergoes special heat treatment and alloy element additions to achieve high tensile strength and yield strength, enabling it to withstand higher loads and pressures.Good toughness: The toughness of ASTM A694 Gr.F60 makes it less prone to brittle failure when subjected to impact and vibration, making it suitable for use in various complex environments.Good weldability: ASTM A694 Gr.F60 is easy to weld and has stable welding properties, facilitating processing and joining.Corrosion resistance: ASTM A694 Gr.F60 contains certain alloy elements that enhance its corr
Contact Now
ASTM A694 F65 rotating flanges are typically made of carbon steel, whose chemical composition includes carbon (C), silicon (Si), manganese (Mn), sulfur (S), and phosphorus (P). Carbon steel, with its high carbon content, is an alloy steel that exhibits excellent strength and corrosion resistance.Mechanical properties: ASTM A694 F65 rotating flanges possess excellent mechanical properties, capable of withstanding working conditions under high pressure and high temperature.
Contact Now
ASTM A694 F65 is a flange made of low-alloy high-strength steel. It is commonly used in areas such as pipelines and valves under high temperature and high pressure conditions. This material has excellent mechanical properties and corrosion resistance, capable of withstanding high pressure and high temperature working conditions. In addition, ASTM A694 F65 flanges have precise dimensions and excellent surface finish, ensuring good sealing performance and preventing leakage and contamination.
Contact Now
Carbon steel flanges, also known as carbon steel flanges, are flanges or end flange connections whose body material is carbon steel. Flanges made of carbon steel are commonly referred to as carbon steel flanges. Common materials include cast carbon steel grades WCB, forgings A105, or Q235B, A3, 10#, #20 steel, 16manganese, 45# steel, Q345B, etc. Usually, to prevent rust, the flange surface is plated (yellow zinc, white zinc, etc.), or treated with anti-rust oil and anti-rust paint.
Contact Now
Product Advantages1.Leakage Prevention: Carbon steel blind flanges can block the holes in the pipeline to prevent the leakage of media, gas or liquid, and ensure the safe operation of the pipeline system.2.Cleanliness of the pipeline system: When the pipeline system needs to be cleaned or stopped, the use of carbon steel blind flanges can prevent pollutants in the pipeline from entering the pipeline system and ensure the cleanliness of the pipeline system.3.High flexibility in use: carbon steel blind flange does not require the center hole of the pipeline system and the connection of the pipel
Contact Now
Matters Needing Attention:Before installation, it is necessary to clean the sliding flange accordingly to ensure that its surface is free of dirt and damage, in order to avoid leakage or damage during or after installation.During the installation process, carbon steel sliding flanges need to be classified according to corresponding specifications and standards, and installed according to the instructions or specifications. If sealing gasket is required, it shall be selected with good oil resistance and anti-aging performance, and its installation shall be correct.
Contact Now
Packaging And Shipping:Blind Flange Carbon Steel is packed in wooden boxes, with foam shock absorbers placed inside each wooden box to prevent damage to the flanges during transportation.The Blind Flange Carbon Steel is fixed in the wooden box, and the four corners are protected with foam shock-absorbing pads.After the Blind Flange Carbon Steel is packed in wooden boxes, it is placed in a container and protected with foam shock-absorbing pads around it to ensure that the flange will not move or collide during transportation.When loading and unloading, it is necessary to use tools such as
Contact Now
Flat welded flange with neck belongs to the national standard flange system. It is one of the manifestations of the national standard flange (also known as GB flange), and is one of the commonly used flanges on equipment or pipelines. The neck height of flat welded flange with neck is low, which improves the stiffness and bearing capacity of the flange.
Contact Now
Product Features1. Wide applicability: The stainless steel sliding flange can be applied to a variety of fluid media, such as water, gas, oil, etc., and can be connected to pipes and equipment of different materials, which has strong versatility. 2. High reliability: the stainless steel sliding flange is tightly connected, has good sealing performance, is not prone to leakage and loosening, and has high stability and reliability.
Contact Now
American standard carbon steel flange neck flat welding flange SO flange ensures qualityIn pipeline engineering, flanges are mainly used for the connection of pipelines. In the pipelines that need to be connected, install a flange. Low-pressure pipelines can use wire flanges, and welding flanges can be used with pressures above 4 kg. Add a sealing point between the two flanges and tighten them with bolts. Flanges for different pressures have different thicknesses and use different bolts.
Contact Now
Carbon steel blind flanges are a common type of pipeline connection component, mainly used to connect two pipelines and achieve sealing and stability between the pipelines. They are mainly made of carbon steel, which gives them good corrosion resistance and high temperature resistance, enabling them to be used in various harsh environments.The main characteristics of carbon steel blind flanges are their stable and reliable connection, able to withstand large pressure and vibration.
Contact Now
Product Application ScenarioIndustrial pipeline connection: 8 Stainless Steel Blind Flange is used in industrial fields to connect pipe segments of piping systems, such as petroleum, food processing, pharmaceutical and water treatment industries. This is often used to close or plug pipes to allow repairs, cleaning or equipment replacement.Pipeline Testing: When pressure or leak testing of pipelines is required, 8 Stainless Steel Blind Flange can be used to install test equipment.
Contact Now
Stainless steel flanges are widely used in petroleum, chemical, aerospace, light industry and other fields. Its main role is to connect pipes and equipment, so that it can effectively transfer a variety of fluid media. At the same time, the stainless steel flange also has good corrosion resistance and corrosion resistance, and has high use value.Fourth, stainless steel flange manufacturing materialsThe manufacturing materials of stainless steel flange are usually 304, 316, 316L and other stainless steel materials, as well as titanium, metal nickel and so on.
Contact Now
Relate News
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
العربية
Русский
日本語
Italiano
