A694 Flange-manufacture,factory,supplier from China

(Total 24 Products for A694 Flange)
High strength and corrosion resistance: A694 F60 has high strength and corrosion resistance, making it suitable for extremely harsh marine working environments with high salinity, high pressure, and high impact.
  Contact Now
ASTM A694 is a standard specification for high-strength steel and alloy steel castings, used in industrial applications where temperatures exceed -20°C. It provides guidance for the material properties, physical testing methods, and acceptance criteria for castings used in various applications, including pressure vessels, boilers, and other high-temperature equipment.ASTM A694 covers a range of material grades with different mechanical properties, such as yield strength, tensile strength, impact toughness, and fatigue resistance.
  Contact Now
ASTM A694 F70 belongs to the category of alloy structural steel, which is specifically designed for applications that require high strength and corrosion resistance. This steel contains a certain amount of alloy elements to enhance its mechanical properties and corrosion resistance. These alloy elements include, but are not limited to, carbon, manganese, silicon, phosphorus, sulfur, etc.ASTM A694 F70 exhibits good toughness at both room and high temperatures, as well as good weldability and machinability.
  Contact Now
High strength: ASTM A694 Gr.F60 undergoes special heat treatment and alloy element additions to achieve high tensile strength and yield strength, enabling it to withstand higher loads and pressures.Good toughness: The toughness of ASTM A694 Gr.F60 makes it less prone to brittle failure when subjected to impact and vibration, making it suitable for use in various complex environments.Good weldability: ASTM A694 Gr.F60 is easy to weld and has stable welding properties, facilitating processing and joining.Corrosion resistance: ASTM A694 Gr.F60 contains certain alloy elements that enhance its corr
  Contact Now
ASTM A694 F70 is a high-strength, corrosion-resistant alloy steel, primarily used in applications that require both high strength and corrosion resistance. Such applications include petrochemical industries, marine engineering, power generation, and other energy-related fields. This steel contains a certain amount of alloy elements, including carbon, manganese, silicon, phosphorus, and sulfur, to enhance its mechanical properties and corrosion resistance.
  Contact Now
ASTM A694 F70 steel is specifically designed for applications that require high strength and corrosion resistance. This steel contains a certain amount of alloy elements to enhance its mechanical properties and corrosion resistance. These elements include, but are not limited to, carbon, manganese, silicon, phosphorus, sulfur, etc.ASTM A694 F70 steel exhibits good toughness at both room and high temperatures, as well as good weldability and machinability.
  Contact Now
ASTM A694 F65 exhibits high tensile strength, yield strength, and hardness, while also possessing certain ductility and toughness. This allows it to withstand working conditions under high pressure and high temperature.Weldability: ASTM A694 F65 is easy to weld and has stable welding properties, facilitating processing and joining.Corrosion resistance: ASTM A694 F65 contains certain alloy elements that enhance its corrosion resistance, allowing it to be used in corrosive environments for long-term durability.
  Contact Now
ASTM A694 F60 is a high-strength steel primarily used to manufacture flanges, fittings, valves, and parts in high-pressure transmission equipment. This steel has high yield strength and tensile strength, allowing it to withstand the effects of high pressure and harsh environments. Additionally, ASTM A694 F60 has good corrosion and wear resistance, ensuring long-term stable performance.Specifically, the chemical composition of ASTM A694 F60 requires a maximum carbon content of 0.26% and a maximum phosphorus content of 0.025%.
  Contact Now
ASTM A694 F60 is a high-strength carbon steel used in high-pressure transmission equipment. It has excellent mechanical properties, including high strength, good toughness, and good corrosion resistance. This steel is commonly used to manufacture various components such as pipelines, containers, and supports, especially in the fields of high-pressure pipelines such as marine, oil, and natural gas.The yield strength of ASTM A694 F60 is twice that of austenitic stainless steel, which allows designers to reduce weight and thereby reduce costs when designing products.
  Contact Now
Material: ASTM A694 F52 is a high-strength, corrosion-resistant alloy material with good tensile strength and yield limit, able to withstand high pressure and heavy loads. This material is composed of various elements such as chromium, nickel, and molybdenum, which together enhance the corrosion resistance and mechanical strength of the material.Connection: ASTM A694 F52 flanges can be reliably connected to piping and other equipment through welding, threaded connections, and other methods.
  Contact Now
 ASTM A694 F65 rotating flanges are typically made of carbon steel, whose chemical composition includes carbon (C), silicon (Si), manganese (Mn), sulfur (S), and phosphorus (P). Carbon steel, with its high carbon content, is an alloy steel that exhibits excellent strength and corrosion resistance.Mechanical properties: ASTM A694 F65 rotating flanges possess excellent mechanical properties, capable of withstanding working conditions under high pressure and high temperature.
  Contact Now
ASTM A694 F65 is a flange made of low-alloy high-strength steel. It is commonly used in areas such as pipelines and valves under high temperature and high pressure conditions. This material has excellent mechanical properties and corrosion resistance, capable of withstanding high pressure and high temperature working conditions. In addition, ASTM A694 F65 flanges have precise dimensions and excellent surface finish, ensuring good sealing performance and preventing leakage and contamination.
  Contact Now
The welding end flange has multiple functions, the main ones being:Connecting pipe: Welding end flanges are commonly used parts in pipe connection, which can connect two pipes together to form a closed transmission system.Sealing medium: The sealing performance of the welding end flange is good, which can effectively prevent medium leakage and ensure the sealing performance of the pipeline system.Support and fixing: The welded end flange has high connection strength and can withstand large pressures and loads.
  Contact Now
The SA-105 flange is typically made of high-chromium and nickel stainless steel, which exhibits excellent corrosion resistance. The main chemical components include chromium (Cr), nickel (Ni), and molybdenum (Mo), which together enhance the material's corrosion resistance and mechanical strength.The SA-105 flange has high tensile strength and yield strength, enabling it to withstand high pressure and vibration.
  Contact Now
The welding end flange is a pipe fitting used to connect pipes with pipes, pipes with fittings, pipes with equipment, etc. It is a disc-shaped part that is most commonly used in pipeline engineering. The welding end flange has holes, and bolts are used to tightly connect the two flanges, with gaskets between them for sealing. The welding end flange connection is a convenient and fast connection method that can withstand high pressure and is widely used in the fields of petroleum, chemical, natural gas, power station, metallurgical pipeline, etc.
  Contact Now
The sliding flange is mainly composed of flange, gasket, bolt and so on. Among them, the size parameters of the flange include outer diameter, aperture, groove depth, groove width, etc. The size parameters of the gasket include inner diameter, outer diameter, thickness, etc. In addition, the diameter, length and other parameters of the bolt are also very important, which determine the installation method and sealing effect of the entire sliding flange.
  Contact Now
A PN16 DN150 Russian Standard Flange is a type of flange that meets the standards set by the Russian Federation.
  Contact Now
Transportation Precautions:Make sure the flange is not moved or bumped during transportation to avoid damage.If container transportation is used, the flange needs to be placed in the container and the sealing of the container must be ensured.If transported by bulk carrier, the flange needs to be placed at the designated location on the cargo ship and the stability of the cargo ship must be ensured.During transportation, you need to pay attention to weather and road conditions to avoid affecting transportation safety.About UsWelcome to Shandong Xinyi Intelligent Manufacturing Co., Ltd.
  Contact Now
High strength: A105N flange is made of high-quality low-carbon steel material, precision forging and processing, with high mechanical strength and wear resistance, able to withstand large pressure and vibration.Corrosion resistance: Due to the addition of nickel and chromium elements in the A105N material, it has excellent corrosion resistance and can be used in various corrosive environments.Interchangeability: The design and manufacturing of A105N flanges comply with standard specifications, allowing them to be interchangeable with other brands or types of flanges of the same specification.
  Contact Now
Special-shaped flange is a kind of pipeline connection flange, which has the following advantages in different pipeline systems:1.Strong adaptability: special-shaped flanges can be customized according to the needs of the pipeline system with flanges of various specifications, shapes and materials to meet different pipeline connection requirements.2.Good maintainability: When the pipeline system needs to be inspected, maintained and replaced, the special-shaped flange can provide convenient disassembly and installation, so as to reduce downtime maintenance time and reduce maintenance costs.3.H
  Contact Now
flange (flange) connection is the two pipes, fittings or equipment, first fixed in a flange flange, between the two flanges, plus flange pad, bolted together to complete the connection. Some pipe fittings and equipment have their own flanges, which are also flange connections. Flange connection is an important connection mode in pipeline construction. The flange connection is easy to use and can withstand greater pressure. In industrial pipes, in the home, the pipe diameter is small, and it is low pressure, and the flange connection is not visible.
  Contact Now
All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, oftentimes regarded as "flange", such as the connection of air waft pipe, this kind of elements can be regarded as "flange class parts".But this connection is totally a section of the equipment, such as the connection of the flange and the water pump, it is now now not right to identify the water pump "flange parts".
  Contact Now
High neck flange: compared with the butt welding flange, the welding workload is large, the welding rod consumption is high, can not withstand high temperature and high pressure and repeated bending and temperature fluctuations, but the field installation is more convenient, can omit the weld film detection process, and is more popular.
  Contact Now
The working principle of the stainless steel flange is to connect two pairs of stainless steel flanges to the pipe port to be connected, and then the two pipes are connected to the flange, why not directly connect, but use such an intermediate, what role does the stainless steel flange play in it?First of all, the interface is often very fragile, flange can maintain high sealing and durability; Secondly, if the threaded connection flange is used, it is easier to replace the damaged pipe that needs to be replaced, or it is easier to remove when diverting; Third, the flange also has an important
  Contact Now
Relate News
Carbon steel flange in accordance with national standards require the size, tolerance range and other production of the flange, the difference between the flange is not produced according to standard sizes also known as the second standard flange (some people call non-standard flange is incorrect), usually some unscrupulous businessmen will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or steel processing flange of the edge material.Usually this steel is the chemical composition and mechanical
Another layer of national standard flange means: according to the national standard requirements of the size, tolerance range, etc.
Carbon steel flange another layer of meaning: according to the national standard requirements of the size, tolerance range, etc.
Flange is a disk-shaped part, z is common in pipeline engineering, flanges are used in pairs. In pipeline engineering, the flange is mainly used for pipeline connection. In the pipeline that needs to be connected, a variety of installation of a piece of flange, low-pressure pipeline can use silk flange, more than 4 kilograms of pressure use welding flange. The gasket is added between the two pieces of flanges, and then tightened with bolts.
Carbon steel flanges are precise in shape and size, with low machining and low cost. However, cast flanges will have holes, cracks and impurities, and the internal structure of the casting is poor. The advantage is that it can have more complex shapes and be produced at low cost. Plain carbon steel flanges are less susceptible to rust and have a denser structure because they have a lower carbon content than cast flanges. They can withstand shear and tensile forces better and have better mechanical properties than forged flanges.